| NO |
YEAR |
TITLE |
| 1 |
2021 |
Palm Oil-Based Chemicals for Sustainable Development of Petrochemical Industries in Malaysia: Progress, Prospect, and Challenges |
| 2 |
2021 |
Phosphate Polyanion Materials as High-Voltage Lithium-Ion Battery Cathode: A Review |
| 3 |
2021 |
Technical difficulties of mixed culture driven waste biomass-based biohydrogen production: Sustainability of current pretreatment techniques and future prospective |
| 4 |
2021 |
Compressive strength of palm oil clinker lightweight aggregate concrete containing coal bottom ash as sand replacement |
| 5 |
2021 |
Properties of fly ash cement brick containing palm oil clinker as fine aggregate replacement |
| 6 |
2021 |
Energy loss analysis of a large scale BIPV system for university buildings in tropical weather conditions: A partial and cumulative performance ratio approach |
| 7 |
2021 |
Durability properties of oil palm shell lightweight aggregate concrete containing fly ash as partial cement replacement |
| 8 |
2021 |
Use of spent garnet in industry: A review |
| 9 |
2021 |
An Evaluation of environmental sustainability performance via attitudes, social responsibility, and culture: a mediated analysis |
| 10 |
2021 |
The evaluation of mechanical properties graphene nanoplatelets reinforced polylactic acid nanocomposites |
| 11 |
2021 |
The effects of seaweed-based pellet binders on growth performance, feed efficiency and carcass characteristics in broilers |
| 12 |
2021 |
Oyster shell waste as a concrete ingredient: A review |
| 13 |
2021 |
The blockchain-enabled technology and carbon performance: Insights from early adopters |
| 14 |
2021 |
An IoT Raspberry Pi-based parking management system for smart campus |
| 15 |
2021 |
Environmental impact of cement production and Solutions: A review |
| 16 |
2021 |
Analysis of a 440C steel roller bearing using finite element method |
| 17 |
2021 |
Process simulation of hydrogen production through biomass gasification: Introduction of torrefaction pre-treatment |
| 18 |
2021 |
SPY-BOT: Machine learning-enabled post filtering for Social Network-Integrated Industrial Internet of Things |
| 19 |
2021 |
Effects of light intensity and nutrients on the lipid content of marine microalga (diatom) Amphiprora sp. for promising biodiesel production |
| 20 |
2021 |
An overview of the utilization and method for improving pozzolanic performance of agricultural and industrial wastes in concrete |
| 21 |
2021 |
7E analysis of a conceptual utility-scale land-based solar photovoltaic power plant |
| 22 |
2021 |
Comprehensiveness in the Research on Sustainability |
| 23 |
2021 |
Role of Project Governance in Managing Projects Sustainability: A Theoretical Perspective |
| 24 |
2021 |
Sustainable Finished Product Optimization on Quality Response and Attitudinal Parameters |
| 25 |
2021 |
Enhanced biodiesel production via esterification of palm fatty acid distillate (PFAD) using rice husk ash (NiSO4)/SiO2 catalyst |
| 26 |
2021 |
Opportunities and Challenges in Nanoparticles Formation by Electrical Discharge Machining |
| 27 |
2021 |
Extraction and application of keratin from natural resources: a review |
| 28 |
2021 |
A Proposed Framework of Life Cycle Cost Analysis for Petrochemical Wastewater Treatment Plants |
| 29 |
2021 |
Effect of Stacking Sequences, Fabric Orientations, and Chemical Treatment on the Mechanical Properties of Hybrid Woven Jute–Ramie Composites |
| 30 |
2021 |
Introduction of Eco-Friendly Adhesives: Source, Types, Chemistry and Characterization |
| 31 |
2021 |
A comprehensive review on the application of nanofluids in the machining process |
| 32 |
2021 |
A Systematic Review of the Technological Factors Affecting the Adoption of Advanced IT with Specific Emphasis on Building Information Modeling |
| 33 |
2021 |
Nanocellulose-Based Materials and Recent Application for Heavy Metal Removal |
| 34 |
2021 |
Glycerol waste to value added products and its potential applications |
| 35 |
2021 |
Choquet Integral Under Pythagorean Fuzzy Environment and Their Application in Decision Making |
| 36 |
2021 |
The impacts of social responsibility on the environmental sustainability performance of the Malaysian construction industry |
| 37 |
2021 |
Separation of samarium from medium rare earth mixture using multi-stage counter-current extraction |
| 38 |
2021 |
Automatic Detection of Oil Palm Tree from UAV Images Based on the Deep Learning Method |
| 39 |
2021 |
Speed reduction: a strategy for sustainable ship operations |
| 40 |
2021 |
The effect of culture medium on the oil yield and fatty acid methyl ester of freshwater microalgae Chlorella vulgaris |
| 41 |
2021 |
Evolution of Industrial Revolution 4.0 in seaport system: an interpretation from a bibliometric analysis |
| 42 |
2021 |
Improvement of enzymatic bioxylitol production from sawdust hemicellulose: optimization of parameters |
| 43 |
2021 |
Waste materials as the potential phase change material substitute in thermal energy storage system: a review |
| 44 |
2021 |
A perspective of COVID 19 impact on global economy, energy and environment |
| 45 |
2021 |
Extraction and Characterization of Keratin from Chicken and Swiftlet Feather |
| 46 |
2021 |
Fourier-Transform Infra Red (FTIR) Analysis of UV Curing Biobased-Polyurethane from Epoxidized Palm Oil Using Acrylation and Thiols Addition |
| 47 |
2021 |
Azolla Biomass as Liquid Biofertilizer to Improve Yield and Productivity of Paddy Plant Using Efficient Monitoring System |
| 48 |
2021 |
Obtaining Bio-Hydrogen from Palm Oil Mill Effluent (POME)-A Preliminary Evaluation |
| 49 |
2021 |
Rheological Characterization of Emulsified Bitumen from Industrial Waste |
| 50 |
2021 |
Strength Performance of Eggshell as a Cement Replacement in Concrete |
| 51 |
2021 |
Properties of Concrete with Eggshell Powder and Tyre Rubber Crumb |
| 52 |
2021 |
Soluble Pozzolanic Materials from Coal Bottom Ash as Cement Replacement Material |
| 53 |
2021 |
A Comprehensive Review of Flexible Pavement Failures, Improvement Methods and its Disadvantages |
| 54 |
2021 |
Comparison of separation performance of absorption column and membrane contactor system for biohydrogen upgraded from palm oil mill effluent fermentation |
| 55 |
2021 |
Self‐Healable Tires |
| 56 |
2021 |
Sustainable green campus in NEPAL: 3E analysis |
| 57 |
2021 |
Eco-design based on ontology: Historical evolution and research trends |
| 58 |
2021 |
Preface: International Conference on Life Sciences and Technology (ICoLiST 2020) |
| 59 |
2021 |
Validation of lean transformation sustainability assessment tool for manufacturing industry: Experts' insights |
| 60 |
2021 |
Measuring the banking performance based on corporate social responsibility achievement: Decision support system adoption |
| 61 |
2021 |
Learning management systems for accreditation approval: A review paper |
| 62 |
2021 |
Determinants for sustainable green product consumption: A glimpse from Peninsular Malaysia |
| 63 |
2021 |
Experimental analysis of tribological performance of modified Jatropha oil enriched with nanoparticle additives for machining application |
| 64 |
2021 |
Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid |
| 65 |
2021 |
Optimization of Impact Energy of Copper-Polylactic Acid (Cu-PLA) Composite Using Response Surface Methodology for FDM 3D Printing |
| 66 |
2021 |
Investigation of The Effect Biodiesel-Butanol-Water Fuel Blend Pressure on A Single-Cylinder Diesel Engine |
| 67 |
2021 |
Heat Transfer Performance of Green Bio-Glycol Based TiO2-SiO2 Nanofluids |
| 68 |
2021 |
Industrial Sustainability Policy and Standards-Related on Management Discipline of SMEs Industry in Malaysia: A Conceptual Framework |
| 69 |
2021 |
Shear Strength Enhancement of Soil Mixed with Palm Oil Clinker |
| 70 |
2021 |
Integration of Parabolic Solar Thermal Collector with Direct Contact Membrane Distillation System for Seawater Desalination |
| 71 |
2021 |
Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia |
| 72 |
2021 |
Development of a Web-Based System for Assessing and Prioritizing the Critical Ergonomics Risk Factors: A Case Study in a Local Automotive Vehicle Manufacturer |
| 73 |
2021 |
Measuring the Unused Capacity for Mature and Immature Area in Palm Oil Nursery Using Time Driven Activity-Based Costing |
| 74 |
2021 |
Bacterial Cellulose Production from Agro-Industrial and Food Wastes |
| 75 |
2021 |
Performance Comparative of Modified Jatropha Based Nanofluids in Orthogonal Cutting Process |
| 76 |
2021 |
A review on rejuvenating materials used with reclaimed hot mix asphalt |
| 77 |
2021 |
RERS-CC: Robotic facial recognition system for improving the accuracy of human face identification using HRI |
| 78 |
2021 |
Robotic mounted rail arm system for implementing effective workplace safety for migrant workers |
| 79 |
2021 |
ADA-SR: Activity detection and analysis using security robots for reliable workplace safety |
| 80 |
2021 |
Need for developing a security robot-based risk management for emerging practices in the workplace using the advanced human-robot collaboration model |
| 81 |
2021 |
Interaction modeling and classification scheme for augmenting the response accuracy of human-robot interaction systems |
| 82 |
2021 |
Security robot for the prevention of workplace violence using the non-linear adaptive heuristic mathematical model |
| 83 |
2021 |
Security and privacy issues related to the workplace-based security robot system |
| 84 |
2021 |
Simulation Comparison Between Equilibrium and Rate-Based Approach for CO2 Removal Via Promoted K2CO3 with Glycine |
| 85 |
2021 |
Economic analysis of rehabilitation approaches for water distribution networks: comparative study between Egypt and Malaysia |
| 86 |
2021 |
Knowledge management and firm innovative performance with the moderating role of transformational leadership |
| 87 |
2021 |
Intellectual capital and bank branches' efficiency: an integrated study |
| 88 |
2021 |
Factors affecting BIM implementation in post-conflict low-income economies: the case of Afghanistan |
| 89 |
2021 |
Critical analysis of pandemic impact on AEC organizations: the COVID-19 case |
| 90 |
2021 |
Halal transportation adoption among food manufacturers in Malaysia: the moderated model of technology, organization and environment (TOE) framework |
| 91 |
2021 |
Where are the higher education institutions from knowledge protection: a systematic review |
| 92 |
2021 |
The cubic S-curve relationship between board independence and intellectual capital efficiency: does firm size matter? |
| 93 |
2021 |
Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region |
| 94 |
2021 |
A Short Review of Nano-Cellulose Preparation from Textile Spinning Waste Cotton |
| 95 |
2021 |
Development of Self-Operating Solar Energy Potential Measuring Devices using Simple Microcontroller Setup |
| 96 |
2021 |
Role of Smart Contracts in Halal Supply Chain Management |
| 97 |
2021 |
A Review of Future Energy Efficiency Measures and CO2 Emission Reduction in Maritime Supply Chain |
| 98 |
2021 |
Advancements in industrial supply chain through lean implementation-a review |
| 99 |
2021 |
Sustainable system for supply chain management in the Malaysian manufacturing industries: a review and research direction |
| 100 |
2021 |
An integrative framework to investigate the impact of blended learning adoption in higher education: a theoretical perspective |
| 101 |
2021 |
Political connections and cash holdings in financially constrained firms: evidence from top 500 firms in Malaysia |
| 102 |
2021 |
Removal of 4-nitrophenol from aqueous solution by using recycled carbon black from waste tyres |
| 103 |
2021 |
The complementarity of lean manufacturing practices with importance-performance analysis: how does it leverage inventory performance? |
| 104 |
2021 |
A value-added view of intellectual capital and financial performance in knowledge management: a case of Chinese insurance companies |
| 105 |
2021 |
Stress and Strain Characteristic of Stone Mastic Asphalt Incorporating Eggshell Powder |
| 106 |
2021 |
A review on nanomaterials as additive in asphalt binder |
| 107 |
2021 |
Performance of Stone Mastic Asphalt incorporating Kenaf fiber |
| 108 |
2021 |
Volumetric Properties and Abrasion Resistance of Stone Mastic Asphalt Incorporating Eggshell Powder |
| 109 |
2021 |
Resilient modulus prediction of nano-silica modified porous asphalt using Finite Element Analysis |
| 110 |
2021 |
Optimization Techniques for Rehabilitating Water Distribution Networks |
| 111 |
2021 |
Utilization of Bamboo Fiber towards sustainable asphalt mixture |
| 112 |
2021 |
Newly Developed Aggregate Gradation for Five Asean Countries |
| 113 |
2021 |
Performance of asphalt mixture incorporated with tin ore tailing |
| 114 |
2021 |
A review on 3D printing bio-based polymer composite |
| 115 |
2021 |
Factors Affecting the Adoption of Emerging Technologies in the Malaysian Construction Industry |
| 116 |
2021 |
Barriers for Implementing Concrete Recycling in Small Construction Projects |
| 117 |
2021 |
Strategies for virtual teams in construction: Easiness-effectiveness analysis |
| 118 |
2021 |
Current Practice in Rehabilitating Old Pipes for Water Distribution Network in Malaysia |
| 119 |
2021 |
The application of green roof for stormwater quantity and quality improvement |
| 120 |
2021 |
Sales Expense Strategies for Competitive Pricing of Industrial Building System (IBS) Components |
| 121 |
2021 |
Effect of Sodium Hydroxide on Mechanical Characteristics of Kenaf Fibers Reinforced Concrete |
| 122 |
2021 |
Review on thermal energy storage and eutectic nitrate salt melting point |
| 123 |
2021 |
Predication of nano-silica modified porous asphalt under dynamic creep by using finite element analysis |
| 124 |
2021 |
An overview of the spark plug engine profile in a spark ignition engine |
| 125 |
2021 |
Factors Affecting Concrete Recycling Adoption in the Construction Projects |
| 126 |
2021 |
Glare prediction of solar PV system in airport environment: A scenario analysis of material, tilt and orientation |
| 127 |
2021 |
Assessment Strategies to Evaluate Building Information Modeling Capabilities of Organizations |
| 128 |
2021 |
Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable … |
| 129 |
2021 |
A Comparative Study on the Readiness Parameters of Highway Construction Projects |
| 130 |
2021 |
Affecting Factors for Implementing Performance-Based Maintenance Contracting: Perspective of Malaysian Road Contractors |
| 131 |
2021 |
Heavy Machinery Operators: Necessary Competencies to Reduce Construction Accidents |
| 132 |
2021 |
Simulation Solvent Extraction of Rare Earth Metal Source Origin from Marine Sediment |
| 133 |
2021 |
Blue Water Footrpint-Industrial Water Consumption Nexus: A Case of Water Supply for Industrial Activities in Semambu Water Treatment Plant |
| 134 |
2021 |
Establishment of flood damage function model for urban area in Kuantan: A preliminary study |
| 135 |
2021 |
Underlying factors of cost overruns in developing countries: multivariate analysis of Jordanian projects |
| 136 |
2021 |
The Influence of PelletRAP™ Rejuvenator on the Mechanical Properties of Reclaimed Asphalt Pavement |
| 137 |
2021 |
A review on the prospect of wind power as an alternative source of energy in Malaysia |
| 138 |
2021 |
A Review Paper on The Effect of Waste Paper on Mechanical Properties of Concrete |
| 139 |
2021 |
Structural Performance Assessment of High Strength Concrete Containing Spent Garnet under Three Point Bending Test |
| 140 |
2021 |
Mechanisms for addressing the impact of COVID-19 on infrastructure projects |
| 141 |
2021 |
The Effect of Palm Oil Fuel Clinker Powder and Cockleshell Powder as Cement Replacement on Durability Properties of the Concrete Mortar |
| 142 |
2021 |
Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication |
| 143 |
2021 |
Review of Lean Manufacturing with IR4. 0 in Automotive Industry |
| 144 |
2021 |
Removal of direct red dye using polysulfone-chitosan ultrafiltration membrane |
| 145 |
2021 |
Performance of asphaltic concrete modified with recycled crushed bricks |
| 146 |
2021 |
Evaluating the Performance of Reclaimed Asphalt Pavement Incorporating PelletRAP as a Rejuvenator |
| 147 |
2021 |
Strength Performance of Oil Palm Shell Lightweight Aggregate Concrete |
| 148 |
2021 |
Identifying factors that affected student enrolment in Additional Mathematics for urban areas of Kuantan district |
| 149 |
2021 |
The effect of quick response manufacturing in factory layout: Assessment using Witness software |
| 150 |
2021 |
A Web Deployed Multi-Agent Based Approach for Student-Lecturer Appointment Scheduling in Institutions of Higher Learning |
| 151 |
2021 |
Calibration and Validation of Lane Changing Following Gap Distance in VISSIM |
| 152 |
2021 |
Characterisation of Colloidal Nanosilica Modified Asphalt binder |
| 153 |
2021 |
A view of MCDM application in education |
| 154 |
2021 |
Incorporation of building information modelling (BIM) in Malaysian higher education institutions: a review |
| 155 |
2021 |
Flood damage and risk assessment for urban area in Malaysia |
| 156 |
2021 |
CLIMATE CHANGE IMPACTS ON HYDROPOWER GENERATION AT KENYIR LAKE |
| 157 |
2021 |
A Survey on Smart Campus Implementation in Malaysia |
| 158 |
2021 |
Drivers of Cloud Computing Adoption in Small Medium Enterprises of Indonesia Creative Industry |
| 159 |
2021 |
Artificial Intelligence Application for Road Paving Assessment Using 360 Mobile Mapping |
| 160 |
2021 |
The Practicality of Virtual Reality Applications in Education: Limitations and Recommendations |
| 161 |
2021 |
Statistical Analysis of Stone Mastic Asphalt Incorporating Kenaf Fibre |
| 162 |
2021 |
Improvement of Green Procurement Performance in the Global Supply Chain: Evidence from Enterprise Resource Planning and Social Network Analysis |
| 163 |
2021 |
The Usage of Recycled Glass In Hot Mix Asphalt: A Review |
| 164 |
2021 |
AN INVESTIGATION INTO LEAN PRACTICES AND THEIR IMPACT ON SUSTAINABILITY PERFORMANCE IN THE LATEX GLOVE MANUFACTURING INDUSTRY |
| 165 |
2021 |
Integrity in Halal Food Supply Chain Towards the Society 5.0 |
| 166 |
2021 |
Effect on Thermal Properties of Nanocellulose Fibre (NCF) Reinforced Biodegradable Polyhydroxylalkanoates (PHA) Composite |
| 167 |
2021 |
Optimal Biomass Transportation Model |
| 168 |
2021 |
A review of wastewater bacterial bio oxidation: mechanisms, reactions, and behaviors |
| 169 |
2021 |
ISO 9001 CERTIFICATION AND SERVICE QUALITY DELIVERY IN MALAYSIAN HIGHER EDUCATION INSTITUTIONS: A CONCEPTUAL MODEL |
| 170 |
2021 |
Extraction of Gelatin from Different Parts of Gallus Gallus Domesticus |
| 171 |
2021 |
Enhancing Palm Oil Inventory Control Support Analytic Tools |
| 172 |
2021 |
Blockchain Technology: Energy Efficiency and Ethical Compliance |
| 173 |
2021 |
A case study on the application of activity based costing on the magnetic inductor |
| 174 |
2021 |
Effects of Enzyme Loading, Incubation Time and Incubation Temperature on Sawdust Hydrolysis by Locally Produced Bacterial Xylanase |
| 175 |
2021 |
Sound Intensity Mapping on Single Cylinder Direct Injection Diesel Engine with The Application of Palm Oil Methyl Ester Biodiesel |
| 176 |
2021 |
In-service Piping Inspection Work-aid Tool for Oil & Gas Industries |
| 177 |
2021 |
Recent advances in solar drying system: A Review |
| 178 |
2021 |
Use of Palm Oil Clinker in Concrete Research: A Review |
| 179 |
2021 |
LANGIT, GUNUNG, SUNGAI, DAN CINTA PUN BERSEMI DI KAKI BENOM |
| 180 |
2021 |
Monitoring energy audit for energy savings using non cost technique at electronics company |
| 181 |
2021 |
An Empirical View of Business Ethics on Press Freedom: A Case Study |
| 182 |
2021 |
Developing Palm Oil Inventory Control System Using Ms Excel Macro |
| 183 |
2021 |
The Impact of ICT and FDI as Drivers to Economic Growth In ASEAN-8 Countries: A Panel Regression Analysis |
| 184 |
2021 |
A Case Study on the Un-Used Capacity Assessment Using Time Driven Activity Based Costing for Magnetic Components |
| 185 |
2021 |
CHARACTERIZATION OF MORTAR WITH PENNISETUM PURPUREUM ASHES AS CEMENT REPLACEMENT MATERIAL |
| 186 |
2021 |
Energy performance and loss analysis of 100 kWp grid-connected rooftop solar photovoltaic system |
| 187 |
2021 |
Application of Micromechanical Modelling for the Evaluation of Elastic Moduli of Hybrid Woven Jute–Ramie Reinforced Unsaturated Polyester Composites |
| 188 |
2021 |
Image Analysis of Surface Porosity Mortar Containing Processed Spent Bleaching Earth |
| 189 |
2021 |
Enhancing the Decolorization of Methylene Blue Using a Low-Cost Super-Absorbent Aided by Response Surface Methodology |
| 190 |
2021 |
Design of Experiment on Concrete Mechanical Properties Prediction: A Critical Review |
| 191 |
2021 |
Effect of Aluminium Powder on Kaolin-Based Geopolymer Characteristic and Removal of Cu2+ |
| 192 |
2021 |
Assessing the Effectiveness of Mitigation Strategies for Flood Risk Reduction in the Segamat River Basin, Malaysia |
| 193 |
2021 |
Production of Renewable Lipids by the Diatom Amphora copulata |
| 194 |
2021 |
Expanding Policy for Biodegradable Plastic Products and Market Dynamics of Bio-Based Plastics: Challenges and Opportunities |
| 195 |
2021 |
Recent Progress on Stability and Thermo-Physical Properties of Mono and Hybrid towards Green Nanofluids |
| 196 |
2021 |
Digital Twins Driven Supply Chain Visibility within Logistics: A New Paradigm for Future Logistics |
| 197 |
2021 |
A Food Insecurity Systematic Review: Experience from Malaysia |
| 198 |
2021 |
The Comparison of Solar-Powered Hydrogen Closed-Cycle System Capacities for Selected Locations |
| 199 |
2021 |
RESEARCH ARTICLE Optimisation of topical antibacterial preparation from Malaysian kelulut honey by using xanthan gum as polymeric agent |
| 200 |
2021 |
Food quality assurance of crude palm oil: a review on toxic ester feedstock |
| 201 |
2021 |
Validating the Effects of Organizational Internal Factors and Technology Orientation on Environmental Sustainability Performance of Malaysian Construction Firms |
| 202 |
2021 |
Optimisation and Evaluation of Antibacterial Topical Preparation from Malaysian Kelulut Honey using Guar Gum as Polymeric Agent. |
| 203 |
2021 |
The Determinants of Waqf Sustainability in Malaysia: A PLS-SEM Analysis |
| 204 |
2021 |
For Evaluation the Performances of Stochastic Streamflow Models for the Multi Reservoirs |
| 205 |
2021 |
The Adoption of IOT in the Malaysian Construction Industry: Towards Construction 4.0 |
| 206 |
2021 |
Challenges in Education and Training to Develop Malaysian Construction Workforce |
| 207 |
2021 |
The usage of Recycled Glass In Hot Mix Asphalt: A Review |
| 208 |
2021 |
Review of Public Sector Project Planning in Pakistan |
| 209 |
2021 |
Now look what you've done, COVID-19! The impact on academic survival among postgraduate students in Malaysia |
| 210 |
2021 |
Factors of single use plastic reduction behavioral intention |
| 211 |
2021 |
EFFECT OF CATALYSTS ON THE YIELD AND PROPERTIES OF LIGNIN FROM MICROWAVE-ASSISTED ACETOSOLV EXTRACTION OF OIL PALM EMPTY … |
| 212 |
2021 |
Antu Language in the Sangin Oral Narrative of the Sihans in Sarawak |
| 213 |
2021 |
Review of Wire-Mesh Tomography in Different Experiments |
| 214 |
2021 |
Performance of Oil Palm Shell Lightweight Concrete Incorporated with Bamboo Fiber |
| 215 |
2021 |
Peach pomace extract as novel cost-effective and high-performance green inhibitor for mild steel corrosion in NaCl solution: experimental and theoretical research |
| 216 |
2021 |
Superior supercapacitance behavior of oxygen self-doped carbon nanospheres: a conversion of Allium cepa peel to energy storage system |
| 217 |
2021 |
Effect on Thermal Properties of Nanocellulose Fibre (NCF) Reinforced Biodegradable Polyhydroxylalkanoates (PHA) Composite |
| 218 |
2021 |
Stress and Strain Analysis of the Traditional Boat Jaloe Kayoh Made of Composite Materials with Centered Loading Using the Finite Element Method |
| 219 |
2021 |
Effects of SiO 2-Al 2 O 3-ZrO 2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using … |
| 220 |
2021 |
Electrochemical Properties of CMC–PVA Polymer Blend Electrolyte for Solid State Electric Double Layer Capacitors |
| 221 |
2021 |
Studies on favorable ionic conduction and structural properties of biopolymer electrolytes system-based alginate |
| 222 |
2021 |
Energy Efficient Seawater Desalination: Strategies and Opportunities |
| 223 |
2021 |
Optimisation of microwave-assisted extraction (MAE) of anthraquinone and flavonoids from Senna alata (L.) Roxb |
| 224 |
2021 |
Energy loss analysis of a large scale BIPV system for university buildings in tropical weather conditions: A partial and cumulative performance ratio approach |
| 225 |
2021 |
Effects of extraction method, solvent and time on the bioactive compounds and antioxidant activity of Tetrigona apicalis Malaysian propolis |
| 226 |
2021 |
Energy performance and loss analysis of 100 kWp grid-connected rooftop solar photovoltaic system |
| 227 |
2021 |
Enhanced Biodiesel Production Via Esterification Of Palm Fatty Acid Distillate (PFAD) Using Rice Husk Ash (Niso4)/Sio2 Catalyst |
| 228 |
2021 |
Optimization of total phenolic compounds extracted from propolis by ultrasound-assisted extraction |
| 229 |
2021 |
Interrelation Between Ionic Conduction and Ions Fraction of Biopolymer Electrolytes Based on Alginate Doped With NH4Cl |
| 230 |
2021 |
Oxygen separation through p84 copolyimide/nanocrystalline cellulose carbon membrane: Impact of heating rates |
| 231 |
2021 |
Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable … |
| 232 |
2021 |
Enhancing Palm Oil Inventory Control Support Analytic Tools |
| 233 |
2021 |
Comparison of Phenol-Formaldehyde and Lignin-Formaldehyde Resin Adhesives for Wood Application |
| 234 |
2021 |
Starch Based Film Incorporated with Clitoria ternatea Flower Extracts as pH Indicator |
| 235 |
2021 |
Environmental Friendliness In Low Carbon Supply Chain And Operations |
| 236 |
2021 |
Potential of Seaweed (Kappaphycus alvarezii) as a Particleboard |
| 237 |
2021 |
Environmental Impact Of Cement Production And Solutions: A Review |
| 238 |
2021 |
Effect of C3H4O3 on Band Gap Narrowing of Proton Conductive Hybrid Polymer Electrolyte |
| 239 |
2021 |
Estimation Of The Potential Trend Changes On The Streamflow With Climatic Responses Consideration |
| 240 |
2021 |
Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid |
| 241 |
2021 |
Effect of thickness on the microstructure and morphology of copper alloy castings |
| 242 |
2021 |
Evolution Of Industrial Revolution 4.0 In Seaport System: An Interpretation From A Bibliometric Analysis |
| 243 |
2021 |
Investigation on microstructure and morphology of copper alloy castings |
| 244 |
2021 |
Ergonomic study of XL wheelchair |
| 245 |
2021 |
Integration of TAM and MOOC for e-learning purpose |
| 246 |
2021 |
Study on effect of different fiber loadings on properties of seaweed/polypropylene blend composite |
| 247 |
2021 |
The principles of designing an expert system in teaching mathematics |
| 248 |
2021 |
Expanding Policy For Biodegradable Plastic Products And Market Dynamics Of Bio-Based Plastics: Challenges And Opportunities |
| 249 |
2021 |
3D Printing Technology for Thermal Application: A Brief Review |
| 250 |
2021 |
Experimental evaluation of tertiary blends of water in diesel with butyl alcohol using compression ignition engine |
| 251 |
2021 |
Newly Developed Thermal Load Profile for Enhancement in Hot Water System |
| 252 |
2021 |
Effect of Vessel Tortuosity on Stress Concentration at the Distal Stent–Vessel Interface: Possible Link With New Entry Formation Through Biomechanical Simulation |
| 253 |
2021 |
Navigation and motion control techniques for surface unmanned vehicle and autonomous ground vehicle: a review |
| 254 |
2021 |
Exploitation of cost-effective renewable heterogeneous base catalyst from banana (Musa paradisiaca) peel for effective methyl ester production from soybean oil |
| 255 |
2021 |
Exploration of efficiency of nano calcium oxide (CaO) as catalyst for enhancement of biodiesel production |
| 256 |
2021 |
Eco-Friendly Adhesives for Wood and Natural Fiber Composites: Characterization, Fabrication and Applications |
| 257 |
2021 |
Explosion characteristics assessment of premixed biogas/air mixture in a 20-L spherical vessel |
| 258 |
2021 |
Extraction and application of keratin from natural resources: a review |
| 259 |
2021 |
Biosorption of Chromium (VI) Ions using Sustainable Eggshell Impregnated Pandanus amaryllifolius Roxb. Biosorbent |
| 260 |
2021 |
Automatic Sliding Gate System using Tap Water Pressure |
| 261 |
2021 |
The effects of good governance and fraud prevention on performance of the zakat institutions in Indonesia: a Sharīʿah forensic accounting perspective |
| 262 |
2021 |
Education and Innovation Growth: Establishing Entrepreneurial University Framework in Malaysia |
| 263 |
2021 |
Extraction of Gallic Acid from Chromolaena sp. Using Ultrasound-assisted Extraction |
| 264 |
2021 |
Evaluation of the Antioxidant and Antimicrobial Activities of Ethyl Acetate Extract of Saccharomyces cerevisiae |
| 265 |
2021 |
Antioksidacijska i antimikrobna aktivnost etil-acetatnog ekstrakta kvasca Saccharomyces cerevisiae |
| 266 |
2021 |
Development and implementation of a video watermarking method based on DCT transform. |
| 267 |
2021 |
Assessing Surface Defects of Flexible Pavement at Parking Lot due to Undesirable Commercial Activities |
| 268 |
2021 |
Extraction of Gelatin from Different Parts of Gallus Gallus Domesticus |
| 269 |
2021 |
Performance Evaluation between RGB and YCrCb in TC-SF-CNNLS for Vehicle Type Recognition System |
| 270 |
2021 |
Factors Affecting Concrete Recycling Adoption in the Construction Projects |
| 271 |
2021 |
Factors Affecting the Adoption of Emerging Technologies in the Malaysian Construction Industry |
| 272 |
2021 |
Encapsulation of Freeze-dried Propolis Powder: Study of in vitro Disintegration and Dissolution |
| 273 |
2021 |
The cybersecurity governance in changing the security psychology and security posture: insights into e-procurement |
| 274 |
2021 |
Factors Of Single Use Plastic Reduction Behavioral Intention |
| 275 |
2021 |
Flood Damage And Risk Assessment For Urban Area In Malaysia |
| 276 |
2021 |
Investigation of groundwater table under rock slope by using electrical resistivity imaging at Sri Jaya, Pahang, Malaysia |
| 277 |
2021 |
Effect of Different Nickel Percentage in Solder Alloy towards Intermetallic Compound Formation and Growth |
| 278 |
2021 |
Effect of Fly Ash as Partial Cement Replacement on Workability and Compressive Strength of Palm Oil Clinker Lightweight Concrete |
| 279 |
2021 |
Characteristics of wood powder, coconut fiber and green mussel shell composite for motorcycle centrifugal clutch pads |
| 280 |
2021 |
Fourier-Transform Infra Red (FTIR) Analysis of UV Curing Biobased-Polyurethane from Epoxidized Palm Oil Using Acrylation and Thiols Addition |
| 281 |
2021 |
Glare prediction of solar PV system in airport environment: A scenario analysis of material, tilt and orientation |
| 282 |
2021 |
Effect of Different Positions of Hollow Section on the High Strength Concrete Beam |
| 283 |
2021 |
Influence of polymer coated aggregate on the aggregate impact and crushing value |
| 284 |
2021 |
An Observation of Usability Website for Down Syndrome Children |
| 285 |
2021 |
Characterisation of bitumen, refined waste oil, and emulsifiers for coating and insulation purposes |
| 286 |
2021 |
The prevalence of Helicobacter pylori in referral population of Turkey |
| 287 |
2021 |
Recycling of coal bottom ash (CBA) as cement and aggregate replacement material: a review |
| 288 |
2021 |
Gasification Performance and Tar Generation Comparison From Fluidized Bed Gasification of Raw and Torrefied Empty Fruit Bunch |
| 289 |
2021 |
Glycerol Waste To Value Added Products And Its Potential Applications |
| 290 |
2021 |
Greenhouse Gas Mitigation And Hydrogen Generation Via Enhanced Ethylene Glycol Dry Reforming On La-Promoted Co/Al2O3 Catalyst |
| 291 |
2021 |
Stochastic modelling of the oral cancer proliferation and death in the presence of Thymoquinone as anticancer therapeutics |
| 292 |
2021 |
On the solvability of a mixed problem for partial differential equations of parabolic type with involution |
| 293 |
2021 |
Halal transportation adoption among food manufacturers in Malaysia: the moderated model of technology, organization and environment (TOE) framework |
| 294 |
2021 |
Study of nozzle distance and oil flow rate effects on the droplets size of minimum quantity lubrication |
| 295 |
2021 |
Heat Transfer Performance of Green Bio-Glycol Based TiO2-SiO2 Nanofluids |
| 296 |
2021 |
Methanolysis of Ceiba Petandra (Kapok) seed for high yield fatty acid methyl ester (FAME): A parametric study |
| 297 |
2021 |
Compressive Strength of Concrete containing Eggshell Powder as Partial Cement Replacement |
| 298 |
2021 |
Heavy Machinery Operators: Necessary Competencies to Reduce Construction Accidents |
| 299 |
2021 |
A study of vehicle routing problem via trade-off ranking method |
| 300 |
2021 |
Electro-Thermal characteristics of hybrid tioz-sioz nanofluid coolants in an electrically-active system |
| 301 |
2021 |
Hybrid power management for fuel cell/supercapacitor series hybrid electric vehicle |
| 302 |
2021 |
Image Analysis of Surface Porosity Mortar Containing Processed Spent Bleaching Earth |
| 303 |
2021 |
Investigation On The Effect Of Monoglyceride Concentration On Palm Oil Based Alkyd Resin Preparation |
| 304 |
2021 |
Impacts Of Climate Change On Rainfall Trends Under RCP Scenarios In Johor, Malaysia |
| 305 |
2021 |
COVID-19 outbreak effects on leadership, job satisfaction and turnover intention: A mediating model of Indonesian banking sector |
| 306 |
2021 |
Improvement of enzymatic bioxylitol production from sawdust hemicellulose: optimization of parameters |
| 307 |
2021 |
Improvement of Green Procurement Performance in the Global Supply Chain: Evidence from Enterprise Resource Planning and Social Network Analysis |
| 308 |
2021 |
Improvement of Wind Turbine Lightning Receptor |
| 309 |
2021 |
Feasibility study on the implementation of Mahalanobis-Taguchi system and time driven activity-based costing in electronic industry |
| 310 |
2021 |
Flood Monitoring and Warning Systems: A Brief Review |
| 311 |
2021 |
In Silico Functional and Structural Insight of Prenylated Pyrazolocurcumin Derivative Associated with the PGE2 Inhibition through mPGES-1 Blocking |
| 312 |
2021 |
Incorporation of building information modelling (BIM) in Malaysian higher education institutions: a review |
| 313 |
2021 |
Relation between Density and Compressive Strength of Foamed Concrete |
| 314 |
2021 |
Green Natural Rubber Composites Reinforced with Black/White Rice Husk Ashes: Effects of Reinforcing Agent on Film's Mechanical and Dielectric Properties |
| 315 |
2021 |
Industrial Science and Technology II |
| 316 |
2021 |
Enhancing recovery of bioactive compounds from Cosmos caudatus leaves via ultrasonic extraction |
| 317 |
2021 |
Structural Analysis Of Plasmid-Mediated Verotoxin Gene Producing Non-O157 Escherichia Coli Using Molecular Dynamic … |
| 318 |
2021 |
Industrial Sustainability Policy and Standards-Related on Management Discipline of SMEs Industry in Malaysia: A Conceptual Framework |
| 319 |
2021 |
Integration of Parabolic Solar Thermal Collector with Direct Contact Membrane Distillation System for Seawater Desalination |
| 320 |
2021 |
Effect of Extraction Time and Temperature on Total Flavanoid Contents of Petai Belalang (Leucaena leucocephala) Seed Pretreated by Enzymatic Hydrolysis. |
| 321 |
2021 |
Integrity in Halal Food Supply Chain Towards the Society 5.0 |
| 322 |
2021 |
Effect of Nitromethane and Jatropha Biodiesel on the Combustion, Performanceand Emission Characteristics of Diesel Engine |
| 323 |
2021 |
The importance of data classification using machine learning methods in microarray data |
| 324 |
2021 |
Investigation of pipe materials and thermal conductivity of soil on the performance of ground heat exchanger operating under Malaysia climate |
| 325 |
2021 |
Investigation of The Effect Biodiesel-Butanol-Water Fuel Blend Pressure on A Single-Cylinder Diesel Engine |
| 326 |
2021 |
Smart Classroom Technology in Artificial Intelligence: A Review Paper |
| 327 |
2021 |
Green Natural Rubber Composites Reinforced with Black/White Rice Husk Ashes: Effects of Reinforcing Agent on Film's Mechanical and Dielectric Properties … |
| 328 |
2021 |
Behaviors and Green Properties of Interlocking Compressed Earth Bricks |
| 329 |
2021 |
Need Analysis on learning methods based on heutagogical strategies among lecturers of Institutions of Higher Learning |
| 330 |
2021 |
Key Drivers for Adopting Design-Build in Public Construction Projects: Malaysian Perspective |
| 331 |
2021 |
Ionic Conductivity Study of Ethylene Carbonate as A Plasticizer in Alginate Bio‐Based Polymer Electrolytes |
| 332 |
2021 |
Learning management systems for accreditation approval: A review paper |
| 333 |
2021 |
Simulation and experimental design of adaptive-based maximum power point tracking methods for photovoltaic systems |
| 334 |
2021 |
Microbial lipid accumulation through bioremediation of palm oil mill effluent using a yeast-bacteria co-culture |
| 335 |
2021 |
Energy analysis of utility-scale PV plant in the rain-dominated tropical monsoon climates |
| 336 |
2021 |
Late transition metal nanocomplexes: Applications for renewable energy conversion and storage |
| 337 |
2021 |
Comparative study on thermal performance of cross-matrix absorber solar collector with series and parallel configurations |
| 338 |
2021 |
Measuring The Banking Performance Based On Corporate Social Responsibility Achievement: Decision Support System Adoption |
| 339 |
2021 |
Tri-metallic Co-Ni-Cu based metal organic framework nanostructures for the detection of an anticancer drug nilutamide |
| 340 |
2021 |
Measuring the Unused Capacity for Mature and Immature Area in Palm Oil Nursery Using Time Driven Activity-Based Costing |
| 341 |
2021 |
Microalgae Biofuels Production: A Systematic Review On Socioeconomic Prospects Of Microalgae Biofuels And Policy Implications |
| 342 |
2021 |
Extracted γ-Al2O3 from aluminum dross as a catalyst support for glycerol dry reforming reaction |
| 343 |
2021 |
Solving optimal power flow problem with stochastic wind–solar–small hydro power using barnacles mating optimizer |
| 344 |
2021 |
Energy-exergy-economic-environmental-energo-exergo-enviroecono (7E) analysis of solar photovoltaic power plant: A case study of 7 airport sites in India |
| 345 |
2021 |
Molecular recognition of isovanillin crosslinked carrageenan biocomposite for drug delivery application |
| 346 |
2021 |
Biochar application as sustainable precursors for enhanced anaerobic digestion: A systematic Review |
| 347 |
2021 |
Void-size-matched hierarchical 3D titania flowers in porous carbon as an electrode for high-density supercapacitive charge storage |
| 348 |
2021 |
A review on advances in green treatment of glycerol waste with a focus on electro-oxidation pathway |
| 349 |
2021 |
Understanding electrochemical capacitors with in-situ techniques |
| 350 |
2021 |
Morphological changes of ZnO nanostructures upon addition of Tannic Acid |
| 351 |
2021 |
Ni/Fibrous type SBA-15: Highly active and coke resistant catalyst for CO2 methanation |
| 352 |
2021 |
Synergistic catalysis of bi-metals in the reforming of biomass-derived hydrocarbons: A review |
| 353 |
2021 |
Efficiency enhancement of a solar dish collector operating with a novel soybean oil-based-MXene nanofluid and different cavity receivers |
| 354 |
2021 |
Seawater as New Renewable Energy Resource: Material Characterization of the Cell Electrodes |
| 355 |
2021 |
Morphological changes of ZnO nanostructures upon addition of Trisodium Citrate (Na3C6H5O7) at different reaction temperatures |
| 356 |
2021 |
Design Optimization and Economic Analysis of a Hybrid System for a Hilly Area in Bangladesh |
| 357 |
2021 |
Nanocellulose-Based Materials and Recent Application for Heavy Metal Removal |
| 358 |
2021 |
Design and Development of Remotely Operated Pipeline Inspection Robot |
| 359 |
2021 |
Chronological perspective on fermentative-hydrogen from hypothesis in early nineteenth century to recent developments: a review |
| 360 |
2021 |
Numerical Analysis Of Ultrathin Tio2 Photoanode Layer Of Dye Sensitized Solar Cell By Using SCAPS-1D |
| 361 |
2021 |
Optimal reactive power dispatch: a bibliometric analysis |
| 362 |
2021 |
Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication |
| 363 |
2021 |
Unraveling synergistic mixing of SnO2–TiO2 composite as anode for Li-ion battery and their electrochemical properties |
| 364 |
2021 |
A Quantitative Approach of Leanness Assessment in Electronics Manufacturing Firms |
| 365 |
2021 |
Thermal–electrical–hydraulic properties of Al 2 O 3–SiO 2 hybrid nanofluids for advanced PEM fuel cell thermal management |
| 366 |
2021 |
Metal oxide composite cathode material for high energy density batteries |
| 367 |
2021 |
Recycling of Cobalt Oxides Electrodes from Spent Lithium-Ion Batteries by Electrochemical Method |
| 368 |
2021 |
Hybrid Nanocomposite Metal Oxide Materials for Supercapacitor Application |
| 369 |
2021 |
Opportunities and Challenges in Nanoparticles Formation by Electrical Discharge Machining |
| 370 |
2021 |
Optimal Biomass Transportation Model |
| 371 |
2021 |
Parametric optimisation of supercritical CO2 thermal-hydraulic characteristics in micro-channels using response surface methodology |
| 372 |
2021 |
Influence of butanol addition on the CI engine performance fuelled with treated waste engine oil |
| 373 |
2021 |
Optimal power flow with stochastic solar power using barnacles mating optimizer |
| 374 |
2021 |
Optimization of Impact Energy of Copper-Polylactic Acid (Cu-PLA) Composite Using Response Surface Methodology for FDM 3D Printing |
| 375 |
2021 |
Review on automatic generation control strategies for stabilizing the frequency deviations in multi-area power system |
| 376 |
2021 |
A systematic review of thermal insulation performance of hollow bricks as a function of hollow geometry |
| 377 |
2021 |
Effect of Organic Linkers on Metal-Organic Frameworks Electrode Fabrication for Battery Supercapacitor Hybrid Application |
| 378 |
2021 |
Microbiota of a UASB Reactor Treating Palm Oil Mill Effluent Using HiSeq Sequencing |
| 379 |
2021 |
Oyster Shell Waste As A Concrete Ingredient: A Review |
| 380 |
2021 |
Effect of Geometrical Parameters on Piezoresponse of Nanofibrous Wearable Piezoelectric Nanofabrics Under Low Impact Pressure |
| 381 |
2021 |
Palm Oil-Based Chemicals For Sustainable Development Of Petrochemical Industries In Malaysia: Progress, Prospect, And Challenges |
| 382 |
2021 |
Fundamentals of Hysteresis in Perovskite Solar Cells: From Structure‐Property Relationship to Neoteric Breakthroughs |
| 383 |
2021 |
Fiber‐Shaped Electronic Devices |
| 384 |
2021 |
Performance assessment of solar chimney power plants with the impacts of divergent and convergent chimney geometry |
| 385 |
2021 |
Energy, economic and environmental performance assessment of a grid-tied rooftop system in different cities of India based on 3E analysis |
| 386 |
2021 |
Performance And Emission Characteristics Of Microbubble-Enhanced Fuels In A Diesel Engine |
| 387 |
2021 |
Performance and Emission Control of Using Steam Injection on Medium-Speed Marine Diesel Engine Running with Biodiesel Fuel |
| 388 |
2021 |
Study on Selection of a Suitable Material and The Parameters for Designing a Portable Flat Plate Base-Thermal Cell Absorber (FPBTCA) |
| 389 |
2021 |
Investigation on The Thermal Performance of Evacuated Glass-Thermal Absorber Tube Collector (EGATC) for Air Heating Application |
| 390 |
2021 |
Pulsed Nd: YAG Laser Parameters Effect on Welding Uncoated Advance High Strength Steel (AHSS) for Automotive |
| 391 |
2021 |
Optimal tuning of a wind plant energy production based on improved grey wolf optimizer |
| 392 |
2021 |
Proceedings of International Conference on Trends in Computational and Cognitive Engineering: Proceedings of TCCE 2020 |
| 393 |
2021 |
Transformation Process of Agricultural Waste to Chemical Production via Solid-State Fermentation |
| 394 |
2021 |
Bayesian Network for Probability Risk Analysis of Biomass Boiler in Renewable Energy Plant |
| 395 |
2021 |
Performance assessment of conceptual bifacial solar PV system in varying albedo conditions |
| 396 |
2021 |
Impacts of Ground Slope on Main Performance Figures of Solar Chimney Power Plants: A Comprehensive CFD Research with Experimental Validation |
| 397 |
2021 |
Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector |
| 398 |
2021 |
Performance Comparative of Modified Jatropha Based Nanofluids in Orthogonal Cutting Process |
| 399 |
2021 |
Analysis on Parameter Effect for Solar Radiation Prediction Modeling using NNARX |
| 400 |
2021 |
Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region |
| 401 |
2021 |
Performance of asphalt mixture incorporated with tin ore tailing |
| 402 |
2021 |
Simulation Modeling The Performance of Ocean Thermal Energy Conversion Power Cycle |
| 403 |
2021 |
Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties |
| 404 |
2021 |
Performance of Ocean Thermal Energy Conversion Closed Rankine Cycle Using Different Working Fluids |
| 405 |
2021 |
Techno-economic efficiencies and environmental criteria of Ocean Thermal Energy Conversion closed Rankine cycle using different working fluids |
| 406 |
2021 |
Experimental Investigation on the Optical and Stability of Aqueous Ethylene Glycol/Mxene as a Promising Nanofluid for Solar Energy Harvesting |
| 407 |
2021 |
Application of Phase Change Materials in Solar Water Heating Systems for Thermal Energy Storage |
| 408 |
2021 |
Investigation on stability of TiO2-SiO2 nanofluids with ratio (70: 30) in W/EG mixture (60: 40) |
| 409 |
2021 |
Enhanced Oil Palm Waste Properties through Torrefaction and Pelletization |
| 410 |
2021 |
Converting Biomass into Bio-Asphalt–A Review |
| 411 |
2021 |
Methanolysis of duckweed and azolla: A comparative analysis |
| 412 |
2021 |
Optimal Allocation and Sizing of Multi DG Units Including Different Load Model Using Evolutionary Programming |
| 413 |
2021 |
Optimization of Extraction Process of Jatropha Oil by Using Quenching Agent |
| 414 |
2021 |
Implementing the reliability of data information in multi-criteria decision making process based on fuzzy TOPSIS and fuzzy entropy |
| 415 |
2021 |
Phosphate Polyanion Materials as High-Voltage Lithium-Ion Battery Cathode: A Review |
| 416 |
2021 |
Physical pretreatment of food waste for reducing hydrogen-consuming bacteria |
| 417 |
2021 |
Design and Construction of a Low-Cost Automatic Single-Phase Transfer Switch |
| 418 |
2021 |
Political connections and cash holdings in financially constrained firms: evidence from top 500 firms in Malaysia |
| 419 |
2021 |
Process simulation of hydrogen production through biomass gasification: Introduction of torrefaction pre-treatment |
| 420 |
2021 |
Production of hydrocarbon based solvent with low aromatic content using ASPEN Plus |
| 421 |
2021 |
Production of Renewable Lipids by the Diatom Amphora copulata |
| 422 |
2021 |
Hybrid Electric Vehicles: A mini Overview |
| 423 |
2021 |
Progress In One-Dimensional Nanostructures |
| 424 |
2021 |
A review of assembly line balancing optimisation with energy consideration using meta-heuristic algorithms |
| 425 |
2021 |
The impacts of red mud dosing on methane production and reduction of CO2: Activity of granules and formation |
| 426 |
2021 |
Examining the factors affecting SME performance: the mediating role of social media adoption |
| 427 |
2021 |
Hybrid Floating Solar Plant Designs: A Review |
| 428 |
2021 |
Combustion Efficiency in a Fluidized-Bed Combustor with a Modified Perforated Plate for Air Distribution |
| 429 |
2021 |
Wavelet Transform Based Fault Identification and Reconfiguration for a Reduced Switch Multilevel Inverter Fed Induction Motor Drive |
| 430 |
2021 |
Properties of fly ash cement brick containing palm oil clinker as fine aggregate replacement |
| 431 |
2021 |
Properties of Mortar with Waste Tyre Rubber as Partial Sand Replacement |
| 432 |
2021 |
Recent Advances In Catalytic Systems For CO2 Conversion To Substitute Natural Gas (SNG): Perspective And Challenges |
| 433 |
2021 |
Recent advances in solar drying system: A Review |
| 434 |
2021 |
Recent Progress on Stability and Thermo-Physical Properties of Mono and Hybrid towards Green Nanofluids |
| 435 |
2021 |
Case Study on the Impact of Artificial Light on Lighting Performance Quality for Architecture Studios |
| 436 |
2021 |
Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review |
| 437 |
2021 |
Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia |
| 438 |
2021 |
HEAT TRANSFER PERFORMANCE OF A RADIATOR WITH AND WITHOUT LOUVERED STRIP BY USING GRAPHENE-BASED NANOFLUIDS |
| 439 |
2021 |
Vegetable and Fruit Waste Production Related to Consumption in Turkey and Certain Middle East Countries |
| 440 |
2021 |
Chemical Pretreatment of Lignocellulosic Biomass for the Production of Bioproducts: An Overview |
| 441 |
2021 |
Analysis Combustion Efficiency in a Fluidized-Bed Combustor With a Modified Perforated Plate for Air Distribution |
| 442 |
2021 |
Low-Carbon Alcohol Fuels for Decarbonizing the Road Transportation Industry: A Bibliometric Analysis 2000-2021 |
| 443 |
2021 |
Removal of 4-nitrophenol from aqueous solution by using recycled carbon black from waste tyres |
| 444 |
2021 |
Technical difficulties of mixed culture driven waste biomass-based biohydrogen production: Sustainability of current pretreatment techniques and future prospective |
| 445 |
2021 |
Removal of nitrogen and phosphorus from agro-industrial wastewater by using microalgae collected from coastal region of peninsular Malaysia |
| 446 |
2021 |
Use of spent garnet in industry: A review |
| 447 |
2021 |
RERS-CC: Robotic facial recognition system for improving the accuracy of human face identification using HRI |
| 448 |
2021 |
The evaluation of mechanical properties graphene nanoplatelets reinforced polylactic acid nanocomposites |
| 449 |
2021 |
The effects of seaweed-based pellet binders on growth performance, feed efficiency and carcass characteristics in broilers |
| 450 |
2021 |
Review of Wire-Mesh Tomography in Different Experiments |
| 451 |
2021 |
Review on thermal energy storage and eutectic nitrate salt melting point |
| 452 |
2021 |
Analysis of a 440C steel roller bearing using finite element method |
| 453 |
2021 |
SPY-BOT: Machine learning-enabled post filtering for Social Network-Integrated Industrial Internet of Things |
| 454 |
2021 |
Effects of light intensity and nutrients on the lipid content of marine microalga (diatom) Amphiprora sp. for promising biodiesel production |
| 455 |
2021 |
An overview of the utilization and method for improving pozzolanic performance of agricultural and industrial wastes in concrete |
| 456 |
2021 |
Role of Project Governance in Managing Projects Sustainability: A Theoretical Perspective |
| 457 |
2021 |
Separation of samarium from medium rare earth mixture using multi-stage counter-current extraction |
| 458 |
2021 |
Sustainable Finished Product Optimization on Quality Response and Attitudinal Parameters |
| 459 |
2021 |
Setting Time and Compressive Strength of Mortar Containing Cockle Shell Powder as Partial Cement Replacement |
| 460 |
2021 |
A Proposed Framework of Life Cycle Cost Analysis for Petrochemical Wastewater Treatment Plants |
| 461 |
2021 |
Shear Strength Enhancement of Soil Mixed with Palm Oil Clinker |
| 462 |
2021 |
Introduction of Eco-Friendly Adhesives: Source, Types, Chemistry and Characterization |
| 463 |
2021 |
A comprehensive review on the application of nanofluids in the machining process |
| 464 |
2021 |
A Systematic Review of the Technological Factors Affecting the Adoption of Advanced IT with Specific Emphasis on Building Information Modeling |
| 465 |
2021 |
Smart Skim Pinjaman Buku Teks (SBPT) School Operation System in Malaysia |
| 466 |
2021 |
Choquet Integral Under Pythagorean Fuzzy Environment and Their Application in Decision Making |
| 467 |
2021 |
Solar PV Microgrids Implementation Model: A Case Study Of Local Self Governments In The Indian State Of Kerala |
| 468 |
2021 |
Solving Short Term Hydrothermal Scheduling Problem in the Light of Cultural Algorithm |
| 469 |
2021 |
Sound Intensity Mapping on Single Cylinder Direct Injection Diesel Engine with The Application of Palm Oil Methyl Ester Biodiesel |
| 470 |
2021 |
Speed reduction: a strategy for sustainable ship operations |
| 471 |
2021 |
Extraction and Characterization of Keratin from Chicken and Swiftlet Feather |
| 472 |
2021 |
Obtaining Bio-Hydrogen from Palm Oil Mill Effluent (POME)-A Preliminary Evaluation |
| 473 |
2021 |
Rheological Characterization of Emulsified Bitumen from Industrial Waste |
| 474 |
2021 |
Steady-State And Dynamic Simulation Study Of Reactive Distillation For FFA Esterification In Biodiesel Synthesis |
| 475 |
2021 |
Properties of Concrete with Eggshell Powder and Tyre Rubber Crumb |
| 476 |
2021 |
Soluble Pozzolanic Materials from Coal Bottom Ash as Cement Replacement Material |
| 477 |
2021 |
A Comprehensive Review of Flexible Pavement Failures, Improvement Methods and its Disadvantages |
| 478 |
2021 |
Self‐Healable Tires |
| 479 |
2021 |
Strategies for virtual teams in construction: Easiness-effectiveness analysis |
| 480 |
2021 |
Preface: International Conference on Life Sciences and Technology (ICoLiST 2020) |
| 481 |
2021 |
Validation of lean transformation sustainability assessment tool for manufacturing industry: Experts' insights |
| 482 |
2021 |
Strength Performance of Eggshell as a Cement Replacement in Concrete |
| 483 |
2021 |
Experimental analysis of tribological performance of modified Jatropha oil enriched with nanoparticle additives for machining application |
| 484 |
2021 |
Stress and Strain Characteristic of Stone Mastic Asphalt Incorporating Eggshell Powder |
| 485 |
2021 |
Structural Performance Assessment of High Strength Concrete Containing Spent Garnet under Three Point Bending Test |
| 486 |
2021 |
Surface Resistivity and Ultrasonic Pulse Velocity Evaluation of Reinforced OPC Concrete and Reinforced Geopolymer Concrete in Marine Environment |
| 487 |
2021 |
Sustainable green campus in NEPAL: 3E analysis |
| 488 |
2021 |
Sustainable system for supply chain management in the Malaysian manufacturing industries: a review and research direction |
| 489 |
2021 |
Advances in Sustainable Construction and Resource Management |
| 490 |
2021 |
Bacterial Cellulose Production from Agro-Industrial and Food Wastes |
| 491 |
2021 |
A review on rejuvenating materials used with reclaimed hot mix asphalt |
| 492 |
2021 |
Robotic mounted rail arm system for implementing effective workplace safety for migrant workers |
| 493 |
2021 |
ADA-SR: Activity detection and analysis using security robots for reliable workplace safety |
| 494 |
2021 |
Need for developing a security robot-based risk management for emerging practices in the workplace using the advanced human-robot collaboration model |
| 495 |
2021 |
Interaction modeling and classification scheme for augmenting the response accuracy of human-robot interaction systems |
| 496 |
2021 |
Security robot for the prevention of workplace violence using the non-linear adaptive heuristic mathematical model |
| 497 |
2021 |
Security and privacy issues related to the workplace-based security robot system |
| 498 |
2021 |
Simulation Comparison Between Equilibrium and Rate-Based Approach for CO2 Removal Via Promoted K2CO3 with Glycine |
| 499 |
2021 |
Economic analysis of rehabilitation approaches for water distribution networks: comparative study between Egypt and Malaysia |
| 500 |
2021 |
Fraud prevention disclosure on Malaysian public universities' websites |
| 501 |
2021 |
Knowledge management and firm innovative performance with the moderating role of transformational leadership |
| 502 |
2021 |
Intellectual capital and bank branches' efficiency: an integrated study |
| 503 |
2021 |
Factors affecting BIM implementation in post-conflict low-income economies: the case of Afghanistan |
| 504 |
2021 |
Critical analysis of pandemic impact on AEC organizations: the COVID-19 case |
| 505 |
2021 |
Where are the higher education institutions from knowledge protection: a systematic review |
| 506 |
2021 |
The cubic S-curve relationship between board independence and intellectual capital efficiency: does firm size matter? |
| 507 |
2021 |
Synthesizing of Zeolite Particle Using Alkaline Plant Extract |
| 508 |
2021 |
Technological Perspectives For Utilisation Of Waste Glycerol For The Production Of Biofuels: A Review |
| 509 |
2021 |
Role of Smart Contracts in Halal Supply Chain Management |
| 510 |
2021 |
The application of green roof for stormwater quantity and quality improvement |
| 511 |
2021 |
The Blockchain-Enabled Technology And Carbon Performance: Insights From Early Adopters |
| 512 |
2021 |
A value-added view of intellectual capital and financial performance in knowledge management: a case of Chinese insurance companies |
| 513 |
2021 |
The Comparison of Solar-Powered Hydrogen Closed-Cycle System Capacities for Selected Locations |
| 514 |
2021 |
A review on nanomaterials as additive in asphalt binder |
| 515 |
2021 |
Performance of Stone Mastic Asphalt incorporating Kenaf fiber |
| 516 |
2021 |
Resilient modulus prediction of nano-silica modified porous asphalt using Finite Element Analysis |
| 517 |
2021 |
Optimization Techniques for Rehabilitating Water Distribution Networks |
| 518 |
2021 |
Utilization of Bamboo Fiber towards sustainable asphalt mixture |
| 519 |
2021 |
Newly Developed Aggregate Gradation for Five Asean Countries |
| 520 |
2021 |
The complementarity of lean manufacturing practices with importance-performance analysis: how does it leverage inventory performance? |
| 521 |
2021 |
The effect of culture medium on the oil yield and fatty acid methyl ester of freshwater microalgae Chlorella vulgaris |
| 522 |
2021 |
The Effect of Palm Oil Fuel Clinker Powder and Cockleshell Powder as Cement Replacement on Durability Properties of the Concrete Mortar |
| 523 |
2021 |
Sales Expense Strategies for Competitive Pricing of Industrial Building System (IBS) Components |
| 524 |
2021 |
The Effect of Vacuum Pressure During Fabrication of Zinc Sulphide Thin Film Using Thermal Evaporator |
| 525 |
2021 |
Predication of nano-silica modified porous asphalt under dynamic creep by using finite element analysis |
| 526 |
2021 |
The Impacts Of Social Responsibility On The Environmental Sustainability Performance Of The Malaysian Construction Industry |
| 527 |
2021 |
Assessment Strategies to Evaluate Building Information Modeling Capabilities of Organizations |
| 528 |
2021 |
A Comparative Study on the Readiness Parameters of Highway Construction Projects |
| 529 |
2021 |
Affecting Factors for Implementing Performance-Based Maintenance Contracting: Perspective of Malaysian Road Contractors |
| 530 |
2021 |
Simulation Solvent Extraction of Rare Earth Metal Source Origin from Marine Sediment |
| 531 |
2021 |
Establishment of flood damage function model for urban area in Kuantan: A preliminary study |
| 532 |
2021 |
The Influence of Waste Tire Powder on the Properties of Waste Tire Powder/Polypropylene Plastic Composite |
| 533 |
2021 |
The Influence of PelletRAP™ Rejuvenator on the Mechanical Properties of Reclaimed Asphalt Pavement |
| 534 |
2021 |
A Review Paper on The Effect of Waste Paper on Mechanical Properties of Concrete |
| 535 |
2021 |
Mechanisms for addressing the impact of COVID-19 on infrastructure projects |
| 536 |
2021 |
The solar reduction of graphene oxide on a large scale for high density electrochemical energy storage |
| 537 |
2021 |
The Usage of Recycled Glass In Hot Mix Asphalt: A Review |
| 538 |
2021 |
Review of Lean Manufacturing with IR4. 0 in Automotive Industry |
| 539 |
2021 |
Removal of direct red dye using polysulfone-chitosan ultrafiltration membrane |
| 540 |
2021 |
Performance of asphaltic concrete modified with recycled crushed bricks |
| 541 |
2021 |
Evaluating the Performance of Reclaimed Asphalt Pavement Incorporating PelletRAP as a Rejuvenator |
| 542 |
2021 |
Strength Performance of Oil Palm Shell Lightweight Aggregate Concrete |
| 543 |
2021 |
Identifying factors that affected student enrolment in Additional Mathematics for urban areas of Kuantan district |
| 544 |
2021 |
The effect of quick response manufacturing in factory layout: Assessment using Witness software |
| 545 |
2021 |
A Web Deployed Multi-Agent Based Approach for Student-Lecturer Appointment Scheduling in Institutions of Higher Learning |
| 546 |
2021 |
Calibration and Validation of Lane Changing Following Gap Distance in VISSIM |
| 547 |
2021 |
Characterisation of Colloidal Nanosilica Modified Asphalt binder |
| 548 |
2021 |
Thermal performance of a fixed‐plate air‐to‐air energy recovery system for building application in hot and humid environment |
| 549 |
2021 |
Thermodynamic Analysis of a Gamma-configuration Stirling Engine |
| 550 |
2021 |
Drivers of Cloud Computing Adoption in Small Medium Enterprises of Indonesia Creative Industry |
| 551 |
2021 |
Artificial Intelligence Application for Road Paving Assessment Using 360 Mobile Mapping |
| 552 |
2021 |
The Practicality of Virtual Reality Applications in Education: Limitations and Recommendations |
| 553 |
2021 |
Statistical Analysis of Stone Mastic Asphalt Incorporating Kenaf Fibre |
| 554 |
2021 |
Towards the development of a comprehensive theoretical model for examining the cloud computing adoption at the organizational level |
| 555 |
2021 |
Troubleshooting on biogas production by using factorial analysis in sewage treatment plant (STP) |
| 556 |
2021 |
Underlying factors of cost overruns in developing countries: multivariate analysis of Jordanian projects |
| 557 |
2021 |
Use of Palm Oil Clinker in Concrete Research: A Review |
| 558 |
2021 |
Iso 9001 Certification And Service Quality Delivery In Malaysian Higher Education Institutions: A Conceptual Model |
| 559 |
2021 |
Validating the Effects of Organizational Internal Factors and Technology Orientation on Environmental Sustainability Performance of Malaysian Construction Firms |
| 560 |
2021 |
A case study on the application of activity based costing on the magnetic inductor |
| 561 |
2021 |
Effects of Enzyme Loading, Incubation Time and Incubation Temperature on Sawdust Hydrolysis by Locally Produced Bacterial Xylanase |
| 562 |
2021 |
In-service Piping Inspection Work-aid Tool for Oil & Gas Industries |
| 563 |
2021 |
Valorization of Indonesian Wood Wastes through Pyrolysis: A Review |
| 564 |
2021 |
Monitoring energy audit for energy savings using non cost technique at electronics company |
| 565 |
2021 |
An Empirical View of Business Ethics on Press Freedom: A Case Study |
| 566 |
2021 |
Developing Palm Oil Inventory Control System Using Ms Excel Macro |
| 567 |
2021 |
The Impact of ICT and FDI as Drivers to Economic Growth In ASEAN-8 Countries: A Panel Regression Analysis |
| 568 |
2021 |
A Case Study on the Un-Used Capacity Assessment Using Time Driven Activity Based Costing for Magnetic Components |
| 569 |
2021 |
Characterization Of Mortar With Pennisetum Purpureum Ashes As Cement Replacement Material |
| 570 |
2021 |
Various risks and safety analysis to reduce fire in oil refinery plant |
| 571 |
2021 |
Enhancing the Decolorization of Methylene Blue Using a Low-Cost Super-Absorbent Aided by Response Surface Methodology |
| 572 |
2021 |
Vision Optimization for Altitude Control and Object Tracking Control of an Autonomous Underwater Vehicle (AUV) |
| 573 |
2021 |
The Influence of Information System Success and Technology Acceptance Model on Social Media Factors in Education |
| 574 |
2021 |
Volumetric Properties and Abrasion Resistance of Stone Mastic Asphalt Incorporating Eggshell Powder |
| 575 |
2021 |
Waste materials as the potential phase change material substitute in thermal energy storage system: a review |
| 576 |
2021 |
Digital Twins Driven Supply Chain Visibility within Logistics: A New Paradigm for Future Logistics |
| 577 |
2021 |
A Food Insecurity Systematic Review: Experience from Malaysia |
| 578 |
2021 |
Waste Recycling Technologies for Nanomaterials Manufacturing |
| 579 |
2021 |
The role of salient beliefs influence on Malaysian academics' intention to publish in indexed journals |
| 580 |
2021 |
Optimisation of topical antibacterial preparation from Malaysian kelulut honey by using xanthan gum as polymeric agent |
| 581 |
2021 |
Food quality assurance of crude palm oil: a review on toxic ester feedstock |
| 582 |
2021 |
Issues and Challenges of Theatre in the University: A Review of MAKUM Theatre |
| 583 |
2021 |
Optimisation and Evaluation of Antibacterial Topical Preparation from Malaysian Kelulut Honey using Guar Gum as Polymeric Agent. |
| 584 |
2021 |
The Determinants of Waqf Sustainability in Malaysia: A PLS-SEM Analysis |
| 585 |
2021 |
For Evaluation the Performances of Stochastic Streamflow Models for the Multi Reservoirs |
| 586 |
2021 |
The Adoption of IOT in the Malaysian Construction Industry: Towards Construction 4.0 |
| 587 |
2021 |
Challenges in Education and Training to Develop Malaysian Construction Workforce |
| 588 |
2021 |
Kemahiran Kepimpinan dalam Kalangan Pengurus Projek Pembinaan Berkenaan Aspek Keselamatan dan Kesihatan Pekerjaan |
| 589 |
2021 |
Review of Public Sector Project Planning in Pakistan |
| 590 |
2021 |
Now look what you've done, COVID-19! The impact on academic survival among postgraduate students in Malaysia |
| 591 |
2021 |
Xylan Recovery From Dilute Nitric Acid Pretreated Oil Palm Frond Bagasse Using Fractional Factorial Design |
| 592 |
2021 |
Yeast and bacteria co-culture-based lipid production through bioremediation of palm oil mill effluent: a statistical optimization |
| 593 |
2021 |
Antu Language in the Sangin Oral Narrative of the Sihans in Sarawak |
